Standard strain relief bushing for round and flat cables 00101000060

Description and features

Our MPRY cable retainer is designed to secure and protect cables at panel entry points. It absorbs tensile, pushing and torsional forces applied to the cable, providing electrical and mechanical protection. It offers good resistance to chemicals and good electrical properties.

Installation is carried out by snap-in fixing in panel holes. Available for round and flat cables.

The system can be installed in two types of hole, depending on the required level of fixing:
· A: the hole allows the part to rotate.
· A × B: the part is fixed in the hole, preventing rotation.
(For ref. 02001002217, a special hole is required; see the general technical drawing).
(Refs. 02001002244 / 02001002251 / 02001002252 must be installed in an oval hole).

· Material: PA66 (Polyamide 66)
· Colours: Black / White
· Operating temperature: -18 °C to +105 °C
· Flammability: UL94 V2, self-extinguishing
· Certifications: UR, CSA

For installation in the structure, the use of the MHPA tool is recommended; alternatively, it can be carried out using pliers.

For references where the Cable suitability is Multiple, consult the general technical drawing, which indicates the different compatible cable sizes. When dimension A or B is specified as a range, consult the same drawing to determine the hole size corresponding to each compatible cable size.

Other colours are available on request for specified quantities.